Locksmith

Locksmith

Josh-the-Locksmith

25 Years Experience

Austin, TX

Male, 46

I've been a locksmith since 1998. I did automotive residential & commercial work from 1998 to 2008. From 2008 to 2018, I did some residential, but mostly commercial work. I have been project managing & estimating since 2018. I used to locksmith in the Chicago area, now the Austin area.

SubscribeGet emails when new questions are answered. Ask Me Anything!Show Bio +

Share:

Ask me anything!

Submit Your Question

330 Questions

Share:

Last Answer on June 11, 2024

Best Rated

Can you help me identify my lock to find a replacement?
Face plate code: R12921 CUS LISTED 24x3 F
(Series A maybe?) Mortise Door Lock - locked from outside by key and by thumbturn recessed from the inside. Color: polished Chrome.

Asked by Nadia Moussouni almost 5 years ago

Sorry that really doesn’t give me the info I would need. Those sound like internal codes. If you’re able to send me photos on twitter, I could probably help you. @ATXJoshL

If I paid the taxes on a building and have paperwork to prove it can a locksmith come unlock the doors

Asked by Ebonii over 4 years ago

I’m not a lawyer, and locksmiths don’t request tax forms when they unlock doors. They usually have you sign a waiver of some kind stating that you have the legal right to have them perform that service, and they collect a drivers license. At that point it’s between you and whoever else may legally have the right to be there. However, I know there are laws pertaining to when a property OWNER can and can not enter a rental unit, and the law is usually on the renters side, not the owners side due to privacy concerns.

I lost both my FOB n starter keys to my car (2006 Honda Civic LX). Is there anyway to get keys made

Asked by BigZeke almost 4 years ago

Certain locksmiths can remake the fob & keys; as well as the dealer.

I just purchased a condo that has a Mortise lock. I am trying to convert to a smart lock but all Mortise ones use smaller Locksets. Any Suggestions? Face is 1-1/16x7-5/8 on mine

Asked by Massimo C almost 4 years ago

It sounds like an older mortise lock. Most modern mortise locks are 8” x 1-1/4”. You’re not going to find something that easily retrofits into the door prep you have. You could have a locksmith fresh install a deadbolt above your mortise lock if your condo will allow it. Otherwise, there just aren’t very many options for the residential mortise lock platform. Look up Yale Nextouch. They make a smart locks with a mortise prep, but it won’t fit in your door as is. You’ll have to have it modified. Also check with your bldg Mgmt before you do anything, I have seen some of them have strict rules what they will let tenants do to maintain uniformity.

How to block a Kwikset deadbolt keyhole? He is ruining it by inserting various objects into it to break the tumblers and jam the keyhole so I am locked out and have to pay locksmith everytime I leave my apartment.

Asked by Brenda almost 5 years ago

If you’re in an apartment, shouldn’t the management company be responsible for fixing your locks if someone is vandalizing it? Usually apartment buildings have strict rules for what they will let you do with your locks. If they will let you, you can get an electronic keypad deadbolt without a key hole. They’re made by Schlage, model # BE375.

I purchased a Brinks Padlock after a break in at my storage unit. A month later the key fit but the key will not turn. Could it be a different lock? How can I get it open?

Asked by Mona over 4 years ago

Yea it’s possible it’s a different lock. Management might know something about it, or it’s always possible you have the wrong key, or someone open & replaced it with another padlock. Lots of possibilities really. Mgmt might have a way to cut the padlocks off, or you can hire a locksmith to pick the lock or cut/drill it off.

What do you think is the easiest and hardest thing to do with your job. Another question would be what is the thing you hate the most and the thing you love the most.

Asked by Mr. Smith almost 5 years ago

As a tech, I would have said the easiest thing to do is residential rekey jobs, the hardest and thing I hated the most was automotive work. Having your arm buried in a door panel in 100 degrees sitting in the sun trying to dig a door lock out; or laying on a customers dirty floorboard working on their ignition. It was the worst.

Love the most, probably all the amazing different places I have been and people I’ve had the opportunity to meet.