Factor
Woodstock, VA
Male, 65
My life in ATC began with 4 years Air Force then another 30 years with the Federal Aviation Admin. working tower & radar at some big international airports. I fought in the 1981 war with PATCO, survived the strike and kept a job that was just too exhilarating to walk away from. While there was nothing better than working airplanes, I did move on through several air traffic supervisory and management positions. It was a long, crazy career but I wouldn't trade a moment of it for love or lucre!
Good hearing from you Aaron. The gear-up landing at Newark was pretty dramatic. Whenever airplane bellies rub runways; sparks will fly! Your question is a good one because videos like the Newark landing show up in the news periodically, yet it’s hard to understand exactly what’s going on. People watch and wonder if a pilot can actually train for such a thing, how does it happen, what are the risks, etc.
First off; pilots obviously never make gear-up landings for practice. That would be kinda like practicing shooting yourself in the foot. The best way to rehearse for such an event is to practice landing WITH the landing gear extended. The trick will be in how the plane approaches the runway, which is going to be pretty much the same as a normal landing. The airplane will be slowed to the normal landing speed, with the nose pointed straight down the runway. Once over the runway, the pilot will ‘flare’ the aircraft; raising the nose to bleed off more speed as the plane descends those final few feet to the surface. Once on the runway, the pilot can use the aircraft’s rudder to try keeping the plane on the runway centerline.
How gear-up landings occur can vary. The most obvious reason is a mechanical malfunction. There is another, fairly common, reason. My flight instructor once told me that there are two kinds of pilots; those who’ve forgotten to put the gear down before landing and those who WILL forget! It’s not quite that extreme but sometimes pilots, especially pilots with low experience levels, can overlook that one important detail in an otherwise perfect landing. If there is an operational control tower at the airport; an alert controller may notice and have the pilot pull up before it’s too late. If the field is uncontrolled, the pilot may not be so lucky!
Risks associated with these landings are pretty much what you’d expect; lots of damage to the plane, a possibility of fire, personal injury and maybe even damage to the runway and associated lighting. No matter what happens – it’s never good and I do not recommend it!
Thanks for writing!
Factor
Share Answer: 
Hey there Frequent Flyer! Thanks for sending a great question. I’m sure you represent the millions of other frequent flyers who’ve had those whimsical daydreams about cutting their way out of a grounded airliner with a can opener. Believe me; their frustration extends all the way up to the control tower.
How do these things happen? The root of most such delays is a reduction in system capacity; either enroute or at the airport. A recent example would be the Asiana Airlines crash on San Francisco Airport. I’m pretty sure that, immediately after the crash, every plane destined for SFO was either held on the ground at its departure point or delayed in the air until a determination could be made that the airport was accepting arrivals. Even when arrivals were resumed, SFO was left with a runway that was closed indefinitely. Closed runways will affect the capacity of any airport, slowing down both arrivals and departures.
Airport capacity refers to the number of landings and takeoffs an airport can handle per hour. Factors that may reduce capacity include such things as aircraft accidents, adverse weather, a reduction in the amount of available runways, equipment failures, controller staffing, workload, etc. There are several more but you get the idea.
Enroute capacity can be affected by many of the same factors that affect airport capacity. If, for instance, there is a large and hazardous storm system affecting the routes from New York to Chicago; the enroute controllers may have their hands full rerouting airborne flights around the bad weather. In such cases, other traffic scheduled to depart New York for Chicago during that time period may be held on the ground for a while. If you’re lucky, your flight might not have boarded yet and you can wait out your delay in the departure lounge. Other planes that have already left the gates may be held on a ramp or taxiway.
Controllers don’t like to see their taxiways blocked by delayed airplanes. If the delays are long enough, some of those planes may have to return to their gate. This can cause additional problems for controllers because flights returning to the gate can complicate the task of getting other departures out to the runways. It’s much like an ‘18 wheeler’ changing its mind half-way up the on-ramp to a busy Interstate highway, then deciding to turn around. A critical mass of congestion can occur. There have been situations where airports became so congested with planes trying to get on or off the ramps while others sat waiting on taxiways that the moment comes when no one could move at all. Total gridlock. When that happens, the last thing needed is more arrivals, so they too are stopped and placed into holding patterns.
Reduced capacity and the resulting delays, especially at the busiest airports, are a major frustration to everyone involved; particularly those who are out in the thick of it, like pilots, passengers and air traffic controllers.
Thanks again for writing!
Factor
Share Answer: 
Greetings and thanks for writing. Although my opinion is worth a little more than a burned out matchstick; I’ll give it to you. I think you should contact the FAA Regional Office nearest you. A list of such offices can be found here:
http://www.faa.gov/about/office_org/headquarters_offices/arc/ro_center/
Ask to speak with someone who is directly involved in hiring controllers, Tell them of your situation and ask if they plan on hiring within your specific timeframe. Don’t be discouraged if they say they won’t be hiring. There are nine (9) FAA Regions and just because one of them has no upcoming vacancies doesn’t mean some or all of the other eight Regions won’t be hiring either. Give ‘em a call. When I was trying to get the job, my ‘home’ Region told me they were not currently hiring. They advised me to call another Regional Office (RO). I did - and that Region was indeed hiring. They also told me I’d have to have my application transferred from my ‘home’ RO to their office. Apparently at the time, you couldn’t have your name on more than one Region’s list of applicants. I don’t know if that is still the case or not but it’s a question to ask them.
If you run into a dead end with the FAA and are still determined to be a controller; contact one or all of the private companies who provide ATC services and ask if they’re hiring.
Best of luck to you!
Factor
Share Answer: 
This is a good question and an easy one for me. Thanks for that! Some questions I get require answers that are a bit convoluted. When that happens, I worry that my explanations are not put together in a way that is easy to understand.
To your question; just remember it this way. You must be employed by the FAA prior to your 31st birthday. That’s it! So if you are hired a month before turning 31 and find yourself in class at the FAA Academy on your birthday; don’t worry. You will not be forcibly ejected! You probably won’t get a cake with candles either.
Cheers,
Factor
Share Answer: 
Obstetrician Gynecologist
If a baby has health complications resulting from a difficult delivery, do you ever feel guilty?
Border Patrol Agent
When you catch an illegal alien crossing the border, is he deported immediately?
Social Security Employee
Did the US economic collapse cause a surge in disability applicants?
Hi Liv. Your question is most interesting because there are so many ways to answer! It’s like asking if there is a particular electrical appliance that should not be plugged in and thrown into the bathtub while someone is bathing. There are so many!
In answering your question, I suppose I need to separate, in my own mind, the character traits that are merely annoying from the ones that make ATC the wrong choice for a career. There are also common traits shared by every successful controller I’ve worked with. Lacking one of these traits may not completely disqualify a person for the job but they may wish it had. Keep in mind that what I say here is based solely on my experience and opinions. Far from scientific.
One trait I believe should disqualify an ATC candidate is an inability to track several developing situations simultaneously, take action on each one at a precise moment while assessing new situations as they develop and predicting when they’ll need further attention. Whew! If the aspiring controller can’t manage an ever changing air traffic picture continuously, over the course of one or two hours; they might want to seek a different profession. Unfortunately, deficiencies in this area are usually uncovered sometime after the candidate has been hired. Pre-employment aptitude tests are no substitute for the crucible of a live air traffic control facility.
Another ‘must have’ trait is self-motivation. Controllers work independently; without direct supervision. Normally, there won’t be someone there to tell them what to do and when to do it. If our candidate is the kind of person who needs frequent direction and guidance to get through the workday; they should stay away from ATC.
A good controller must also be able to accept, if not embrace, change. The ATC environment is constantly changing. It’s not just the volume, type and complexity of air traffic either. There are continuous changes in weather conditions and changes on the airport surface that require controllers to immediately adjust. And let’s not forget about technological changes. ATC equipment – the tools of a controller’s trade – are ever changing. New aircraft, such as the Boeing Dreamliner, are coming on line and with them; new flight characteristics the controllers must adjust to.
There are the more obvious ‘show-stoppers’ such as substance abuse, alcoholism, and flatulence. (Maybe I’m just kidding about the flatulence but try spending several hours in the confines of a control tower with someone who has it!)
I could go on but don’t want to bore you. The bottom line is; there are several behavior or character traits that don’t really work well in the ATC environment. Unfortunately, the FAA’s pre-employment screening process isn’t 100 percent effective.
Thanks for a great question! Hope I wasn’t too long-winded.
Cheers,
Factor
Share Answer: 
That’s a very simple, straightforward question! So here I go with another long and convoluted answer. I know, I know. There’s that old adage that says to never give ‘em more information than they asked for. Generally good advice but I don’t think it applies here on Jobstr. If people are interested enough to write; they probably want a response that’ll actually help them understand the subject. And uhh, one day I hope to produce such a response! But for now; just read on and test your attention span.
First off; the optimum time on a control position is different than the time limit defined in FAA’s labor agreement with the controller’s union (National Air Traffic Controllers Association). I’m not sure whether that limit has changed since I left the FAA but it used to be two hours. The time limit for working a control position was established back in the 1970s because controllers were frequently being left bleeding to death on very busy positions with no relief in sight. By the time someone showed up to give them a break, they were beyond exhausted. Depending on conditions; even a 90 minute stint could shred your nerves like confetti. I’ll just say this lead to safety issues.
Defining the optimum time on position isn’t as easy as it sounds. “Optimum” is probably one of the original fifty shades of gray. I had one friend who would awake before dawn and drive 1,100 miles to visit his girlfriend in the Florida Keys. He’d stop only for gas or the men’s room. Sixteen hours at the wheel didn’t bother him at all. But me? Driving more than eight hours would probably get me into a news headline that began with the word “Tragic.” Another friend I worked with would become irritable if he was left on a busy sector for more than 60 minutes. In time, the best ATC Supervisors learned what the “optimum” time on position was for each of their controllers and tried to get them relieved before they burst into flames. We were all different; kind of like the contents of that ‘junk drawer’ in your kitchen. Don’t have a junk drawer? I’ll send you a starter kit.
As to the break time; that depended on factors like who you were working for (Captain Bligh or Captain Kangaroo), how busy the shift was or the individual controller’s work ethic. If a controller had taken a particularly brutal beating on a position; most Supervisors would allow them a little extra break time if they could. Some controllers would either refuse a break altogether or take a very short one if they knew their teammates needed them. Then there were the controllers who’d milk their break until an angry Supervisor came and chased them back to work. The optimum break time was always as subjective as the optimum amount of time on position.
Thanks for writing and for making it to the end of this response!
Cheers,
Factor
Share Answer: 
Hello “No. 1 Uncle,” and a happy 4th back at you! I hope you enjoyed a fabulous fireworks display.
In order to obtain a permit for public fireworks displays, the organizers must obtain approval from the Federal Aviation Administration. Any conditions the FAA imposes must be followed in order to receive that permit. The FAA then makes the information on such events available to those who need to know.
I can’t say there have never been aircraft accidents due to fireworks displays. Using absolutes like “always” or “never” tend to get me into trouble. I’ll just say I don’t recall hearing of any and that makes sense to me. After all, aeronautical charts clearly indicate minimum safe altitudes (MSA) to fly at. Planes rarely operate below the MSA unless they are taking off or landing. It’s a pretty safe bet your FAA won’t approve fireworks displays near an airport, along those departure or arrival paths. Besides, fireworks don’t go much higher that a few hundred feet. Certain flights do operate at those altitudes but only during daylight hours; a bad time for fireworks. These planes are involved in such things as crop-dusting, banner towing, aerial photography or some other low altitude mission.
I hope this answers your question. Thanks for writing!
Factor
Share Answer: 
-OR-
Login with Facebook (max 20 characters - letters, numbers, and underscores only. Note that your username is private, and you have the option to choose an alias when asking questions or hosting a Q&A.)
(A valid e-mail address is required. Your e-mail will not be shared with anyone.)
(min 5 characters)
By checking this box, you acknowledge that you have read and agree to Jobstr.com’s Terms and Privacy Policy.
-OR-
Register with Facebook(Don't worry: you'll be able to choose an alias when asking questions or hosting a Q&A.)
Browse Jobs
Host a Q&A
Search
Submit Your Question
Host a Q&A
Last 7
