Ask a Firefighter anything

490 Questions

Last Answer on June 29, 2022

after a fire, why do fire fighters cut burnt woods in 2 ft. long?

Asked by James about 11 years ago

Didnt know we did?

How do you figure out where/how the fire started?

Asked by Alyssa almost 11 years ago

Many things from burn patterns forming v starting at the point of orign. We also use tools from machines that detect accellerants to K9 smelling out for accellerants.

992 Votes

So you wanna be a Firefighter?

Check our Jobstr's career page for salary information, educational requirements, suggested reading and more!

Do you have to be a volunteer firefighter or can you be a firefighter full time?

Asked by Michael over 10 years ago

No you can be both. There are approx 1.5 million career firefighters with the remainder being volunteer. Jobs in the south tend to be easier to obtain for some reason , of course you need to make yourself marketable by obtaining a degree, get certified as an EMT.

992 Votes

When I was first joining the fire department, we learned about all the gases. There is a gas but I can't remember the name. What gas burns that is impossible to put out? They say if it is buried it goes out, but once it is uncovered, it still burns.

Asked by Shari Wasco over 10 years ago

Several types of gases, racing fuel is one that you can not see as it is being burned. It depends on the flash point generally a flammable liquid has a flash point of under 100 deg. I am not sure which one you are referring to specifically.

992 Votes

Also on Jobstr...

Casting Director

What do you look for when auditioning candidates for reality TV?

School Teacher

How do you feel about the idea of year-round schooling?

Hairstylist and Makeup Artist

How much am I supposed to tip my hairstylist?

As a FF who operates on a quint, do you see drawbacks to quints versus separate ladders and engines? Does your department use engines and ladders two, or just quints? Thanks.

Asked by 1738 about 10 years ago

We use a quint 75' American LaFrance. I personally prefer Quints in that you have all the tools of the trade in one, but there are ramifications with that. 1. Decreased maneuverability based on the size of the rig. 2. decreased amount of water tank. 3. Limits on height of ladder. But overall I personally like having Quints. We do have 3 pumpers and 2 quints.

991 Votes

to be a vol. auxiliary firefighter do you need to go through formal training aka the fire academy or just station ( local ) training ?

Asked by ... over 10 years ago

Each state has set training requirements most the same but some more in depth. It depends per state some training can be initially in house with testing done at a academy.

991 Votes

I work in a small office that is attached to a garage by an interior door. The garage is used to repair heavy equipment (Loaders, Back Hoe, Dozers) as well as gravel trucks. Should I have a C O sensor in the office?

Asked by Rich almost 10 years ago

Yes a CO detector should be in place based on the usage of the diesel engines etc.

990 Votes

Showing 134 - 140

Show All

332 More Answers by Firefighter

Last 7

17 18 19 20 21 22

...

Next 7 Answers

Firefighter

Ask me anything!

What do YOU do?

after a fire, why do fire fighters cut burnt woods in 2 ft. long?

How do you figure out where/how the fire started?

So you wanna be a Firefighter?

Do you have to be a volunteer firefighter or can you be a firefighter full time?

When I was first joining the fire department, we learned about all the gases. There is a gas but I can't remember the name. What gas burns that is impossible to put out? They say if it is buried it goes out, but once it is uncovered, it still burns.

Also on Jobstr...

As a FF who operates on a quint, do you see drawbacks to quints versus separate ladders and engines? Does your department use engines and ladders two, or just quints? Thanks.

to be a vol. auxiliary firefighter do you need to go through formal training aka the fire academy or just station ( local ) training ?

I work in a small office that is attached to a garage by an interior door. The garage is used to repair heavy equipment (Loaders, Back Hoe, Dozers) as well as gravel trucks. Should I have a C O sensor in the office?

Firefighter

Ask me anything!

What do YOU do?

after a fire, why do fire fighters cut burnt woods in 2 ft. long?

How do you figure out where/how the fire started?

So you wanna be a Firefighter?

Do you have to be a volunteer firefighter or can you be a firefighter full time?

When I was first joining the fire department, we learned about all the gases. There is a gas but I can't remember the name. What gas burns that is impossible to put out? They say if it is buried it goes out, but once it is uncovered, it still burns.

Also on Jobstr...

As a FF who operates on a quint, do you see drawbacks to quints versus separate ladders and engines? Does your department use engines and ladders two, or just quints? Thanks.

to be a vol. auxiliary firefighter do you need to go through formal training aka the fire academy or just station ( local ) training ?

I work in a small office that is attached to a garage by an interior door. The garage is used to repair heavy equipment (Loaders, Back Hoe, Dozers) as well as gravel trucks. Should I have a C O sensor in the office?

Login

Forgot Your Password?

Register